FITE 2 last version

The sequel of the legendary wargame with a complete graphics and interface overhaul, major new gameplay and design features such as full naval combat modelling, improved supply handling, numerous increases to scenario parameters to better support large scenarios, and integrated PBEM++.
Post Reply
walkra
Posts: 48
Joined: Sat Feb 16, 2008 6:42 pm
Location: Lanus, Argentina

FITE 2 last version

Post by walkra »

Hello, how are You?. Please, what is the latest version of FITE2 for TOAW IV and can you provide me with the files? Thank you!!!
User avatar
larryfulkerson
Posts: 40173
Joined: Sat Apr 16, 2005 9:06 pm
Location: Tucson, AZ
Contact:

RE: FITE 2 last version

Post by larryfulkerson »

here you go. enjoy. [ attached below is the 1.9 version of FITE2 zipped up ]

EDIT 7/17/2021 replaced the picture with the FITE2 v.1.9 file sorry about that
Attachments
FITE2 v1.9.zip
(1.53 MiB) Downloaded 68 times
bumper sticker on the door to an underground nuclear launch facility:
"A nuclear detonation anywhere in the world in 30 minutes or the next one is free".
walkra
Posts: 48
Joined: Sat Feb 16, 2008 6:42 pm
Location: Lanus, Argentina

RE: FITE 2 last version

Post by walkra »

Larry, thank You, very much!!!! very friendly as always!!!
walkra
Posts: 48
Joined: Sat Feb 16, 2008 6:42 pm
Location: Lanus, Argentina

RE: FITE 2 last version

Post by walkra »

Larry, Hi, how are you?. I`m sorry, but I am not see the attached file. A thousand sorry for the inconvenience.
Thank you!!
User avatar
larryfulkerson
Posts: 40173
Joined: Sat Apr 16, 2005 9:06 pm
Location: Tucson, AZ
Contact:

RE: FITE 2 last version

Post by larryfulkerson »

Hey walkra: I edited the post to attach the FITE2 file(s) ( and removed the image file ).

You can find the FITE2 v1.10 version here:
https://www.matrixgames.com/forums/tm.a ... age=1&key=
( post #30 )
bumper sticker on the door to an underground nuclear launch facility:
"A nuclear detonation anywhere in the world in 30 minutes or the next one is free".
walkra
Posts: 48
Joined: Sat Feb 16, 2008 6:42 pm
Location: Lanus, Argentina

RE: FITE 2 last version

Post by walkra »

Hi, Larry, I was able to download it correctly!!!
Question: I copied the files that are in "/Graphics Override/Fite2" (like the "Design Elements" and "Goodies folders, as well as the .bmp and .png files) to "/Graphics Override/Fite2 v1.10". It's Okay? Or should I just leave the file "FITE2 v1.10.eqp" alone?.
Thank you very much.
User avatar
larryfulkerson
Posts: 40173
Joined: Sat Apr 16, 2005 9:06 pm
Location: Tucson, AZ
Contact:

RE: FITE 2 last version

Post by larryfulkerson »

I like to put the *.bmp and *.png files inside the folder that is inside the graphics override folder. Unless they aren't the kind of image files
that deal with the terrain. It's possible that either one or both of them may just be the splash image for that scenario.

Image
Attachments
temp.jpg
temp.jpg (102.31 KiB) Viewed 57 times
bumper sticker on the door to an underground nuclear launch facility:
"A nuclear detonation anywhere in the world in 30 minutes or the next one is free".
walkra
Posts: 48
Joined: Sat Feb 16, 2008 6:42 pm
Location: Lanus, Argentina

RE: FITE 2 last version

Post by walkra »

My English is not good (I should have given it more attention at school!!).
I did not understand some points:
a) I understand that the file "FITE2 V1.10.eqp" should only go in the folder "FITE2 V1.10" and that the other files that I mentioned before, I left them in the old "FITE2 ". its's OK ?.
b) Do you have another file with the correct Stukas values? If you have it, please, if you can pass it on to me. Surely it is another "FITE2 V1.11.eqp" for the same folder "FITE2 V11", right?
Thank you very much for your patience.
User avatar
larryfulkerson
Posts: 40173
Joined: Sat Apr 16, 2005 9:06 pm
Location: Tucson, AZ
Contact:

RE: FITE 2 last version

Post by larryfulkerson »

ORIGINAL: walkra
My English is not good (I should have given it more attention at school!!).
I did not understand some points:
a) I understand that the file "FITE2 V1.10.eqp" should only go in the folder "FITE2 V1.10" and that the other files that I mentioned before, I left them in the old "FITE2 ". its's OK ?.
That would be fine.
ORIGINAL: walkra
b) Do you have another file with the correct Stukas values? If you have it, please, if you can pass it on to me. Surely it is another "FITE2 V1.11.eqp" for the same folder "FITE2 V1.11", right?
Thank you very much for your patience.
right you are. Please find attached below the files for FITE2 v1.11
Attachments
FITE2v1.11.zip
(1.51 MiB) Downloaded 86 times
bumper sticker on the door to an underground nuclear launch facility:
"A nuclear detonation anywhere in the world in 30 minutes or the next one is free".
walkra
Posts: 48
Joined: Sat Feb 16, 2008 6:42 pm
Location: Lanus, Argentina

RE: FITE 2 last version

Post by walkra »

Done!! And I have started with the first moves in the FITE2 1.11 (I have all week with the first turn!). Larry, Thank you very much!! Big hug!!
Post Reply

Return to “The Operational Art of War IV”