Harpoon 3 ANW / HUD 3: Scenarios
Harpoon 3 ANW / HUD 3: Scenarios
Hi Guys,
just a heads-up: I was working on a MP scenario, putting carrier groups in a titanic struggle. But since MP is not so often demanded/discussed, I´ll make a single player scen of it.
Regards,
Ralf
just a heads-up: I was working on a MP scenario, putting carrier groups in a titanic struggle. But since MP is not so often demanded/discussed, I´ll make a single player scen of it.
Regards,
Ralf
RE: Harpoon 3 ANW / HUD 3: Scenarios
New tutorial scen for Harpoon ANW 3.10 / HUE:
http://harpgamer.com/harpforum/index.ph ... owfile=602
LESSON IX - HUD3
-- LESSON IX: UnRep, Boarding and Takeover --
The purpose of this lesson is to familiarize the user how to conduct ship-to-ship unrep, boarding and takeover operations.
Playing through this lesson the user should become familiar with the following tactics:
1. Ship-to-ship Underway Replenishment.
2. Boarding of a hostile ships.
3. Takeover of hostile facilities.
Good Guys
INTELLIGENCE:
We have deteced a hostile base. Close to it there must be a hostile merchant ship.
MISSION:
Prepare your attacking birds for a strike, take the base and board the hostile ship.
EXECUTION:
1. Bring the AOR vessel and your LH close to each other. Then transfer AGM-65D Mavericks from the AOR vessel to the Essex.
2. Ready your Harriers with loadout
#142 SEAD (Sidearms and Mavericks).
3. Use your Harriers to destroy the EW sites and the hostile Command Post.
4. Now fly in your helos and take the ammo dump, the runway and the gas tank with your troops.
5. Find the hostile transport ship and board it with your helo based teams.
Note: This is not an official AGSI scen. It was written to supplement the official tutorial scens with one focusing on several new features.
http://harpgamer.com/harpforum/index.ph ... owfile=602
LESSON IX - HUD3
-- LESSON IX: UnRep, Boarding and Takeover --
The purpose of this lesson is to familiarize the user how to conduct ship-to-ship unrep, boarding and takeover operations.
Playing through this lesson the user should become familiar with the following tactics:
1. Ship-to-ship Underway Replenishment.
2. Boarding of a hostile ships.
3. Takeover of hostile facilities.
Good Guys
INTELLIGENCE:
We have deteced a hostile base. Close to it there must be a hostile merchant ship.
MISSION:
Prepare your attacking birds for a strike, take the base and board the hostile ship.
EXECUTION:
1. Bring the AOR vessel and your LH close to each other. Then transfer AGM-65D Mavericks from the AOR vessel to the Essex.
2. Ready your Harriers with loadout
#142 SEAD (Sidearms and Mavericks).
3. Use your Harriers to destroy the EW sites and the hostile Command Post.
4. Now fly in your helos and take the ammo dump, the runway and the gas tank with your troops.
5. Find the hostile transport ship and board it with your helo based teams.
Note: This is not an official AGSI scen. It was written to supplement the official tutorial scens with one focusing on several new features.
RE: Harpoon 3 ANW / HUD 3: Scenarios
Ralf,
You're becoming hard to keep up with! [&o]
Thanks for the continued hard work, I'll try to get some of the rebuilt for 3.10, Harpoon 2 scenarios available as soon as possible.
Cheers
Darren
You're becoming hard to keep up with! [&o]
Thanks for the continued hard work, I'll try to get some of the rebuilt for 3.10, Harpoon 2 scenarios available as soon as possible.
Cheers
Darren
*******************************************
Editor HUD-II/HUD3 Harpoon Databases
http://www.taitennek.com/hud3-db/hud3-index.htm
Development Team H3ANW v3.8, v3.9, v3.10 & v3.10.1
*******************************************
Editor HUD-II/HUD3 Harpoon Databases
http://www.taitennek.com/hud3-db/hud3-index.htm
Development Team H3ANW v3.8, v3.9, v3.10 & v3.10.1
*******************************************
RE: Harpoon 3 ANW / HUD 3: Scenarios
Guys,
just an update: Working on a large Far East scenario including five sides, at least four will be playable.
Regards,
Ralf
just an update: Working on a large Far East scenario including five sides, at least four will be playable.
Regards,
Ralf
RE: Harpoon 3 ANW / HUD 3: Scenarios
I'm interested in this, but can't work out where to put it / which database etc. to use
Could you tell me which database ? - then presumably I can put the file in the scenario/tutorial folders beyond that.
I might be being a bit slow but what I've tried so far doesn't seem to work (ANW DB 2.4.3, Harpoon 3 "standard", HUD3 1.5.0) with the 3.10.1.0 release version,
Thanks for any assistance,
Chris
Could you tell me which database ? - then presumably I can put the file in the scenario/tutorial folders beyond that.
I might be being a bit slow but what I've tried so far doesn't seem to work (ANW DB 2.4.3, Harpoon 3 "standard", HUD3 1.5.0) with the 3.10.1.0 release version,
Thanks for any assistance,
Chris
RE: Harpoon 3 ANW / HUD 3: Scenarios
Hi Chris,
The database I usually use is Darren Buckley´s (aka Bucks) HUD 3 V 1.5. It is the new official database, replacing the old Standard Database. When you want to write a scenario simply choose this database in the launcher database menu and start the scenario editor.
When you want to play scenarios written with this database, same: Choose this database, go to play and there you are.
If you have any questions regarding scenario design, just post them here or PM me.
Regards,
Ralf
ORIGINAL: chrisol
I'm interested in this, but can't work out where to put it / which database etc. to use
Could you tell me which database ? - then presumably I can put the file in the scenario/tutorial folders beyond that.
I might be being a bit slow but what I've tried so far doesn't seem to work (ANW DB 2.4.3, Harpoon 3 "standard", HUD3 1.5.0) with the 3.10.1.0 release version,
Thanks for any assistance,
Chris
The database I usually use is Darren Buckley´s (aka Bucks) HUD 3 V 1.5. It is the new official database, replacing the old Standard Database. When you want to write a scenario simply choose this database in the launcher database menu and start the scenario editor.
When you want to play scenarios written with this database, same: Choose this database, go to play and there you are.
If you have any questions regarding scenario design, just post them here or PM me.
Regards,
Ralf
RE: Harpoon 3 ANW / HUD 3: Scenarios
Hmm, not sure what I'm doing wrong.
I select the HUD3 database, and I can load the scenario fine in the scenario editor.
When I try to load it in the game itself it tells me the database signature and scenario signature don't match, so aborts.
Chris
I select the HUD3 database, and I can load the scenario fine in the scenario editor.
When I try to load it in the game itself it tells me the database signature and scenario signature don't match, so aborts.
Chris
RE: Harpoon 3 ANW / HUD 3: Scenarios
Chris,
It's probably caused by the update/patch or a mixup somewhere with the shipped scenario versions and the current HUD3. Like everyone else I was hit by the expiry issue and received the latest game execs about the time everyone else started downloading the update.
I'll make an effort to rebuild/update the Tutorial Battleset to the just released 3.10.1 Game version, and ensure it's rebuilt with the HUD3 version 1.5.5 - January 4th 2011. I'm currently working on adjusting the HUD3 sonar values to work with the new Game sonar system, I've almost plotted the values I'll be implementing and will start releasing more frequent updates.
Cheers
Darren
It's probably caused by the update/patch or a mixup somewhere with the shipped scenario versions and the current HUD3. Like everyone else I was hit by the expiry issue and received the latest game execs about the time everyone else started downloading the update.
I'll make an effort to rebuild/update the Tutorial Battleset to the just released 3.10.1 Game version, and ensure it's rebuilt with the HUD3 version 1.5.5 - January 4th 2011. I'm currently working on adjusting the HUD3 sonar values to work with the new Game sonar system, I've almost plotted the values I'll be implementing and will start releasing more frequent updates.
Cheers
Darren
*******************************************
Editor HUD-II/HUD3 Harpoon Databases
http://www.taitennek.com/hud3-db/hud3-index.htm
Development Team H3ANW v3.8, v3.9, v3.10 & v3.10.1
*******************************************
Editor HUD-II/HUD3 Harpoon Databases
http://www.taitennek.com/hud3-db/hud3-index.htm
Development Team H3ANW v3.8, v3.9, v3.10 & v3.10.1
*******************************************
RE: Harpoon 3 ANW / HUD 3: Scenarios
That's great thanks... now to find 1.5.5
Chris
Chris
- saruwatarikaito
- Posts: 31
- Joined: Sat Jan 30, 2010 7:45 pm
- Location: Aberdeen, Scotland
- Contact:
RE: Harpoon 3 ANW / HUD 3: Scenarios
Hi Darren
I look forward to the update as well, also having the same problems with HUD 3 1.5.5 as Chris.
Ade
I look forward to the update as well, also having the same problems with HUD 3 1.5.5 as Chris.
Ade
RE: Harpoon 3 ANW / HUD 3: Scenarios
Yes, I've found the 1.5.5 database but it doesn't fix the problem,
Oh well - plenty of other things to be getting on with !
bw
Chris
Oh well - plenty of other things to be getting on with !
bw
Chris
RE: Harpoon 3 ANW / HUD 3: Scenarios
Guys,
I have just rebuilt this scenario with the latest game execs and HUD 3 V 1.5 as of October, 30th. This is the last HUD version which works well for me. I´ll upload the scen at Harpgamer (same link as before) and sent it to Taitennek.
Regards,
Ralf
I have just rebuilt this scenario with the latest game execs and HUD 3 V 1.5 as of October, 30th. This is the last HUD version which works well for me. I´ll upload the scen at Harpgamer (same link as before) and sent it to Taitennek.
Regards,
Ralf
RE: Harpoon 3 ANW / HUD 3: Scenarios
Great - thanks.
That now loads with the HUD3 1.5.0 that came with UE.
Good to see how this works,
Thanks
That now loads with the HUD3 1.5.0 that came with UE.
Good to see how this works,
Thanks
RE: Harpoon 3 ANW / HUD 3: Scenarios
Hi,
Good to hear! So we are making progress. Enjoy the tutorial and the possibility to test the new features.
Regards,
Ralf
ORIGINAL: chrisol
Great - thanks.
That now loads with the HUD3 1.5.0 that came with UE.
Good to see how this works,
Thanks
Good to hear! So we are making progress. Enjoy the tutorial and the possibility to test the new features.
Regards,
Ralf
RE: Harpoon 3 ANW / HUD 3: Scenarios
Hi guys,
I´ve slightly modified and rebuilt Atlantic Clash with HUD 3 V 1.5.0 as of 2010-10-30. It now should run with the latest exes:
http://harpgamer.com/harpforum/index.ph ... owfile=599
I´ve slightly modified and rebuilt Atlantic Clash with HUD 3 V 1.5.0 as of 2010-10-30. It now should run with the latest exes:
http://harpgamer.com/harpforum/index.ph ... owfile=599
RE: Harpoon 3 ANW / HUD 3: Scenarios
Pooners,
just updated my modified version of "A Fight to the Death" from 3.9.4 to 3.10 / HUE, using HUD 3 V 1.5.0 as of 2010-10-30:
http://harpgamer.com/harpforum/index.ph ... owfile=570
Have fun!
Ralf
just updated my modified version of "A Fight to the Death" from 3.9.4 to 3.10 / HUE, using HUD 3 V 1.5.0 as of 2010-10-30:
http://harpgamer.com/harpforum/index.ph ... owfile=570
Have fun!
Ralf
RE: Harpoon 3 ANW / HUD 3: Scenarios
Maybe I'm just a perma-noob.
But none of the HUD3 scenarios work for me. I get constant file sig. mis matches.
Here comes a naive question...
What improvements are made in a database update, that is counterbalanced by the inability to play all the subsequently outdated scenarios?
I can't even get the accompanying modded scenarios to work either.
But none of the HUD3 scenarios work for me. I get constant file sig. mis matches.
Here comes a naive question...
What improvements are made in a database update, that is counterbalanced by the inability to play all the subsequently outdated scenarios?
I can't even get the accompanying modded scenarios to work either.
"I don't believe in reincarnation because I refuse to come back as a bug or as a rabbit".
RE: Harpoon 3 ANW / HUD 3: Scenarios
You can open the scenario you want to play in the scenario editor, re-save the scenario and you'll be good to go in the game itself.