THE THREAD!!!

[btd64]

INP....All Hail The Thread....GP

[BBfanboy]

For us the coldest day of 2023 ...GP

The smilies offered on the board are inadequate. You need something like:

frozensmiley1.jpg (166.22 KiB) Viewed 171 times

frozensmiley2.gif (18.19 KiB) Viewed 171 times

FrozenTongueSmiley.gif (126 KiB) Viewed 171 times

[btd64]

How true....GP

[Apollo11]

Hi all,

Good morning!


Leo "Apollo11"

[Orm]

Afternoon Gentlemen. Ladies.

[Orm]

Been a very mild winter here. So far.

[btd64]

Good morning everyone....GP

[Apollo11]

Hi all,

Good morning!


Leo "Apollo11"

[Zovs]

Good morning folks!

[Orm]

Hey.

[btd64]

Good afternoon everyone ....GP

[USSAmerica]

Good afternoon - Tithe.

[USSAmerica]

I hope all you clowns are doing well and staying as warm as you can this winter. I haven't done any more yard work since the end of December, but I've been keeping busy with indoor activities. I've finally been able to move my model railroad from the "thinking about it" stage to getting construction underway for the first part. The layout will eventually be two levels, with a helix of 6 loops connecting the two levels. Here is a picture of the base structure for the helix. It will have a plywood surface except for the access opening in the middle. Hopefully, I'll have some plywood mounted and at least the first loop of the helix to show you guys soon.

20230204_203432s.jpg (104.54 KiB) Viewed 89 times

The layout will be N Scale (1:160) and this helix base is 54" square. The loops will be 48" in diameter and will rise 16" from the base (lower) level to the upper level.

[btd64]

I hope all you clowns are doing well and staying as warm as you can this winter. I haven't done any more yard work since the end of December, but I've been keeping busy with indoor activities. I've finally been able to move my model railroad from the "thinking about it" stage to getting construction underway for the first part. The layout will eventually be two levels, with a helix of 6 loops connecting the two levels. Here is a picture of the base structure for the helix. It will have a plywood surface except for the access opening in the middle. Hopefully, I'll have some plywood mounted and at least the first loop of the helix to show you guys soon.

20230204_203432s.jpg

The layout will be N Scale (1:160) and this helix base is 54" square. The loops will be 48" in diameter and will rise 16" from the base (lower) level to the upper level.

Looking good...
Your progress will get me motivated....GP

[btd64]

I hope all you clowns are doing well and staying as warm as you can this winter. I haven't done any more yard work since the end of December, but I've been keeping busy with indoor activities. I've finally been able to move my model railroad from the "thinking about it" stage to getting construction underway for the first part. The layout will eventually be two levels, with a helix of 6 loops connecting the two levels. Here is a picture of the base structure for the helix. It will have a plywood surface except for the access opening in the middle. Hopefully, I'll have some plywood mounted and at least the first loop of the helix to show you guys soon.

20230204_203432s.jpg

The layout will be N Scale (1:160) and this helix base is 54" square. The loops will be 48" in diameter and will rise 16" from the base (lower) level to the upper level.

Hopefully your progress will get me started again....GP

[Apollo11]

Hi all,

Good morning!


Leo "Apollo11"

[USSAmerica]

Good morning - Tithe.

[btd64]

Good morning everyone....GP

[Apollo11]

Hi all,

Good morning!


Leo "Apollo11"

[btd64]

Good morning everyone....GP