Operation Husky

Moderator: AlvaroSousa

User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

Operation Husky

Post by ago1000 »

A couple of starting questions.

$GatherLand - only works on land you control, can't gather on enemy turf. Is that correct?

Victory points total
Not sure how they work. To be more specific, are objectives worth points? If so can they be changed.
Are victory locations which I imported the victory.txt are they worth points? Can there value be changed.

I've been slowly adding the things I've learned from a smaller map to Operation Husky. It's map is almost complete. Just need to clean up Africa and Italy. I'm happy with Sicily, may add a couple little roads and minor towns to help with remote locations with supply.
I've included the map.

Image
Attachments
operationHusky1.jpg
operationHusky1.jpg (84.72 KiB) Viewed 519 times
User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

A closer look at a portion of Sicily. Gonna use some of the ideas from Africa Scenario with regard to aircraft distances and sizes of units.

Image

Just want to clarify my post above:
I'm using map objectives to control the AIs movements and victory locations for calculating total points for calculating who wins. Hopefully I can balance it so both sides have a chance to win.

Also, loops.txt not sure what it does? How to set it up? Is it necessary?
Attachments
OperationHusky2.jpg
OperationHusky2.jpg (117.95 KiB) Viewed 520 times
User avatar
ncc1701e
Posts: 10259
Joined: Tue Oct 29, 2013 7:50 pm
Location: Utopia Planitia Fleet Yards

RE: Operation Husky

Post by ncc1701e »

Nice! [:)]
Chancellor Gorkon to Captain James T. Kirk:
You don't trust me, do you? I don't blame you. If there is to be a brave new world, our generation is going to have the hardest time living in it.
User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

Thanks ncc1701e.
This is just a preview of what I'm hoping to accomplish with the AI, in this video I am trying to make the Axis aggressive with multiple attack fronts and OP(3:1). The British need to fall back to two lines trying to use the first line of defense terrain as best as possible but when they are overwhelmed fall back into the second line. Holy cow, it worked. Need to figure out invasions now (unless the scenario can only be played as human Allies, haven't decided yet)

https://youtu.be/xGQ7BDsPtMw

User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

Another question: Since my Sicily is 10 times bigger than the original games, I need to make adjustments on troops. For example, 1 counter Army is 50000 men in original game, in the scenario above it's 5000 so I will need 10 of them to represent the Army. However, I don't know how many tanks are in the armor division or mech. The reason I ask is I need to represent the German 160 tanks, Italian 100 and US and UK 600 tanks present. Aircraft I can figure out. So in terms of original game design, how many tanks would you say are present in an armored and mech counters? Thanks in advance.

User avatar
AlvaroSousa
Posts: 11628
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: Operation Husky

Post by AlvaroSousa »

Looks good. Really just reduce the unit size.

Realize your scale.

So if you have brigades and divisions then make divs as bdes and small corps as divs... dont use large corps.
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

OK. Thx
User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

OK. Half way through the Axis OOB. Found an awesome site to assist with their locations at the beginning.

Just wondering, is this possible?? Am I missing a scripting command for the editor? I know I need to fix the title of the screen but can I place a pic in the descriptions of the scen.

Just wondering.
Thanks in advance for your help.

Image
Attachments
OpeningScreenPicMapB.jpg
OpeningScreenPicMapB.jpg (61.56 KiB) Viewed 519 times
User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

Just a shot in the dark but with the limitations of Unity's RichText I'm assuming you will need to write some code on your end and agree on an image name for the two scenario description text files. Like pic1 and pic2.

The best I can do now. The image I want doesn't appear. Something in house does.

Image
Attachments
pic2.jpg
pic2.jpg (92.69 KiB) Viewed 519 times
User avatar
AlvaroSousa
Posts: 11628
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: Operation Husky

Post by AlvaroSousa »

<b>Sicily 1943</b> is correct.

You put...

<b>Sicily 1943/b> is correct.

That I know of there is no way to put a picture in the description. Post the richtext you used for the image above
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

Thanks. Got the title fixed and playing around with size. Here is the information inside the file:

<b>Sicily July 1943</b>

The game starts <size=30> July 10, 1943 </size> with Germany and Italy at war with the UK,USA,USSR,Canada,Free French.

This scenario simulates historical conditions at the beginning of operation Husky the invasion of Sicily. It is best played as the Allies with the Axis as the AI.

<size=30><color=#008000ff>The race to Messina: Operation Husky</color></size>

<quad material=pic1.jpg size=200 x=0.1 y=0.1 width=.5 height=.5>

I can make an area invisible too but I think the quad material is where the code on your end needs to be embedded in unity. pic1.jpg and pic2.jpg is what I was thinking as names and have those pics in the campaign directory. I think right now quad material is that funky pic I see.

FYI: I should add this is really no big deal. If there is no simple way then don't even worry about it. No need to do any research.
User avatar
AlvaroSousa
Posts: 11628
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: Operation Husky

Post by AlvaroSousa »

I didnt even know rich text could put an image in. What probably is happening is that it doesn't know where to look for the image.
You would very likely have to path it to the MyGames under the scenario folder and place the image there.
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

Not a big issue. It would look cool that's all.[8D]
More in line with the mod:
In the editor:
1) How do I increase the range of paradrops? (ie. from 8 to 12)
2) How do I increase the range of the air units? (interceptors - 24, ground support -24). I was trying to figure it out with the Africa scenario.

I was also thinking of taking an air unit and making it not movable(like a strat bomber for axis) but have if on full support mode to simulate artillery support.

Just finished the Axis AI and holding off on the Allies AI. Need to now place air units but I would like to lengthen their range because of the scale of my map. I figure I can run the paratroopers from Malta, so I may only need to increase their range by a couple. We'll see.
User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

If paradrop range cannot be increased easily, I was thinking starting one day into the conflict with the drops already occurred.
My option with the air units are limited though. I would need to bring the US air units up to 1944 escort fighters and that seems too OP for this scenario.
I would have to use Strategic bombers as tactical if I can't extend their range. (Also, it may be unrealistic because all air would need to come from Malta and not Africa)
1 map hex = 5km or 3 miles
All units are reg size, I used Div units and need to adjust efficiency to balance the game. Forces should be close to equal.
3) Also, Naval units that start at sea seem to start off low in supply. Is there a way of preventing that in the editor?
User avatar
AlvaroSousa
Posts: 11628
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: Operation Husky

Post by AlvaroSousa »

Just saw this

Air Transport Range - Campaign menu item 2nd column half way down.
Air unit range - Country -> Unit Stats -> select unit kind -> Range
Air unit not moving - Can't do
Adjust size of unit label and ZoC - Unit Basics

If naval units aren't fully supplied it means there is a bug somewhere in the editor I must hunt down.
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

Thanks Alvaro for all your help.

Had to reduce the scale of my map for the units so I started from the beginning again. Too much room allowed too many options for the Allies.
So depicted is a portion of my new map and I'm trying to make sure only the southern part of the island and western part are invadable as per the original Husky operation. I have no problem making the hex invadable:
Green Box empty (land)
Brown Box + (beach)
Blue Box + (ocean)
by changing each tile individually to control landing areas.
However, when I change one tile on the map, it's changes/impacts the same tile in alternate location. I don't want this to happen. So I'm doing something wrong.
Question 1: How do I prevent this?
Question 2: Can't seem to get port hexes to allow invasions like land hexes. Is there a reason for this or does it follow the same rules as when you create the tile?

Thanks again. Included a pic with my explanation of question 1 and you can see port hexes are not invadable.

Image
Attachments
tilesQuestion.jpg
tilesQuestion.jpg (122.82 KiB) Viewed 521 times
User avatar
AlvaroSousa
Posts: 11628
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: Operation Husky

Post by AlvaroSousa »

If you are changing a tile in the Tilemap from the top menu it changes all the tiles of the same type.

My suggestion place a minefield in the beaches you dont want invaded.

NW of Barcelona
Below Messina.

You can even change the minefield icon and text to whatever you want. I can help you with that if you like.

The scenario looks better than I imagined.
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

Thanks Alvaro
I'm hoping to be able to test this size map by the end of the week. The other map was just too large for brigades and reg units. The AI was doing what I wanted but the Allies could bypass everything. Hopefully this is the right size map for both the AI and make it tough for the Allies.
Thanks again.
User avatar
AlvaroSousa
Posts: 11628
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: Operation Husky

Post by AlvaroSousa »

You need to place map orders for defensive lines for the A.I. Map orders represent local tactics.
D1 and D2 orders are defensive orders. The D1, RED colored, orders is always occupied 1st in a line so you want to place these on the key locations. D2, BLACK, fill the rest of the line.

A.I. Strat -> Input Axis Orders -> select order -> place on map
Input Allied Orders -> select order -> place on map
When done click Hide Images then go to another menu item.

When you click each side it will highlight their orders.

You also need to put objectives in there.
A.I. Strat -> Set Both Obj -> LMB on map
Keep objectives within ~3 hexes of each other. Think about how you would approach objectives because the A.I. will follow the path you lay out.


I would match the Campaigns menu item with that of the 1939 scenario except the fields you changed.
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
User avatar
ago1000
Posts: 899
Joined: Fri Aug 06, 2004 7:12 am
Location: Canada

RE: Operation Husky

Post by ago1000 »

Thanks Alvaro, will do.
Today I will be working on a supply issues and some production issues for the countries. For some reason, the UK ships are low on supply and UK, US are not obtaining their production values on the map while Canada is getting it all. Quite funny. I will work on the AI on Monday. Gonna work with the Axis AI first, so I can do a test run with balance by Tuesday.

Clarify: Only the UK CVs, BB are low on supply. All the UK and US transport fleets are in supply.

Image
Attachments
SupplyIssues.jpg
SupplyIssues.jpg (155.47 KiB) Viewed 521 times
Post Reply

Return to “MODS and Scenarios”