Strategic Command WWII: World at War - v1.11.00 (Full Version)

All Forums >> [New Releases from Matrix Games] >> Strategic Command Series >> Strategic Command WWII: World at War



Message


ledrobi -> Strategic Command WWII: World at War - v1.11.00 (4/20/2021 12:12:38 PM)

A new update for Strategic Command WWII: World at War is now available. Check out the full changelog.

The patch can be downloaded from here.

GAME ENGINE CHANGES
- Fixed a controlled unit movement error that led to a CTD when attempting to end the move along several hidden enemy units (EQFL_Sapare).

- Fixed an error that did not properly allow Kamikaze attacks to damage adjacent enemy units. Normally a Kamikaze attack has a 25% chance of also damaging an adjacent naval unit by 1 strength point.

- Fixed an outstanding issue that still did not allow some Free units to upgrade relative to their current controlling major nation (Gilber).

- Fixed an issue where upon surrender, FREE naval units were being bumped out of non surrendering territorial ports (Gilber).

- Fixed an Amphibious Transport error that did not reduce movement action points when the amphibious transport moved adjacent to an enemy capital ship that then attacked it (EQFL_Sapare).

- Fixed a rare CTD that would occur when attempting to place a new unit right at the start of your turn.

- Fixed an issue where Special Forces amphibious transports would auto load into a dead end Land + Sea enemy hex (rocketman71).

- Fixed an error where Subs caught in ice could increase their action points > 1 by switching modes (APrusty).

- Fixed an error where if a Transport unit was selected, the Operational Action buttons would sometimes not be clickable (ruskicanuk).

- Fixed an error that prevented Axis players from being able to shift the Murmansk convoy to Arkhangelsk when cutting off the applicable rail line running from Murmansk to Belomorsk (Aprusty).

- Fixed an error where the game engine would incorrectly move a currently occupied capital to its previous location if liberated. Now the capital will not move back unless the current capital is also liberated (EQFL_Sapare).

- Purchase screen no longer has a unit pre-selected to help avoid accidental purchases when clicking the Purchase or Production button (rocketman71).

- Mods with zero cost units can now have units upgraded and purchased (stalkerbrumikcz).

- Enemy targets and estimated losses for fully visible units/resources can now be highlighted when selecting a friendly unit to attack via the OPTIONS->ADVANCED settings.

- Units can now be put to sleep for one turn via the Sleep Tool mouse hover and pressing the space bar instead of a left mouse button click (EQFL_Sapare).

- Units set to sleep will now also be skipped by the AI when it is controlling friendly countries and units on your turn (EQFL_Sapare):
- Left mouse button click will still perform the regular 'sleep' function.
- Units set to sleep for one turn will have this indicated with a black dot instead of a white dot which indicates regular 'sleep'.

- Naval units can now have a maximum supply that matches the max port strength providing supply, previously naval units were capped at 10 supply even if a port provided 12 supply. All other naval supply rules remain the same, e.g. a 5 strength port can still provide maximum 10 supply to naval units.

- Air units will now gain maximum supply from any source, so long as they are attached to an HQ (Pocus).

- Supply map overlay will now display any mismatched supply values, e.g. if a unit has less than the overlay value, it will show in brackets in red alongside with the overlay value.

- Improved AI HQ amphibious landings where the AI will actively try and land in a pocket of friendly units and not next to enemy unit positions if possible (Mithrilotter).

- AI scripts can now be accessed in the OPTIONS->ADVANCED->SCRIPTS screen via 'Advanced (AI)' for review as well as to disable any disagreeable planning events.

- AI will now consider the belligerence status of a potential Amphibious invasion goal position to avoid potential invasions when not at war with the target position, as applicable to custom mods (wobbleguts).

- HQ supply rules, plus boosting/linking rules recap:
- HQ units, after amphibiously unloading, start at supply equal to 5 + their current level of Amphibious Warfare technology. Supply will drop 2 supply points per turn after that. This allows the HQ to act as a Mulberry for an initial landing until further supply sources are achieved.
- HQ distribution supply:
- HQ supply = 0 will have a distribution supply value of 3 (previously it was 5).
- HQ supply 1 or 2 will have a distribution supply value of 5.
- HQ supply 3 or 4 will have a distribution supply value of 6 (previously it was 8).
- HQ supply 5 will have a distribution supply value of 8.
- HQ supply > 5 will have a distribution supply value of 10.
- HQ boosting can only be achieved if the first HQ has a supply value >= 3 (previously it was > 0).
- The HQ to be boosted must have a supply value < 5 and is now automatically increased to a supply value of 5 which caps its distribution supply at 8.
- This will improve distribution supply for boosted HQs that were at 3 or 4 supply (from 6 to 8), and more importantly, will allow them to 'operate' and 'upgrade' now that they are at 5 supply.
- LOW SUPPLY HQ boosting can only be achieved if the source HQ has a supply value >= 1 and < 3.
- The HQ to be boosted must have a supply value < 3 and is now automatically increased to a supply value of 5 which caps its distribution supply at 6.
- Between two HQs, the higher rated HQ receives the boost, the lower rated HQ is the source of the boost.
- Source HQs of a supply boost to another HQ are now highlighted with a yellow hex outline, indicating they are the source of the supply boost, when clicking on the recipient HQ.
- Air units do not receive supply from an HQ unless they are attached.
- Under supplied Air units, due to not being attached to an HQ, will be indicated by a red hatch beneath the applicable Air unit.
- Under supplied Air units, attached to an HQ but not to the most optimal supply giving HQ, will be indicated by a purple hatch beneath the applicable Air unit.

EDITOR CHANGES
- The following have been adjusted from 5 point increments to 1 point increments for more precision when customizing campaigns (Elessar2).
- Combat Target Data, Raid Multiplier (MPPs), Enemy NM Losses (Per Raid)
- Upgrade Increments Data (per research level), Raid Multiplier (MPPs), Enemy NM Losses (Per Raid)
- Automatic Increments Data (per research level), Raid Multiplier (MPPs), Enemy NM Losses (Per Raid)
- Strength/Reinforce/Reformation Data, % Cost Per Reinforcement Point, % Cost Per Elite Reinforcement Point

All Campaigns
- Reduced Rail Gun range from 3 to 2 (Dorky8).
- Moved Rangoon Port from 175,74 to 174,75 to prevent an exploitative landing at Moulmein.
- At Padang 178,87 the road now connects to the port (Mithrilotter).
- Control of hex 193,61 changed from Chinese to Japanese.
- The Map Text for Vigo in Spain has been adjusted (Pocus).
- The cost of Rocket research has been reduced from 175 to 150 MPPs, and Germanyís starting levels in this increased by 1 in all campaigns (ElvisJJonesRambo).
- The Japanese Light Cruiser Abukuma has been added to all campaigns (Pocus).
- Added alternative deployment locations for Romanian units to deploy if Romania switch sides (Mithrilotter).
- Indiaís National Morale will now fall by 10,000 points if Delhi is captured by the Axis, and by 5,000 apiece if Calcutta, Madras or Bombay fall (Mithrilotter).
- Increased Germanyís National Morale loss due to the fall of Berlin from 10,000 to 20,000 points (Mithrilotter).
- Increased the trigger % of the Mobilization_2 script for Vichy France to swing towards the Allies from 75% to 100% if France is liberated and there are no Axis units within 4 hexes of Paris (Mithrilotter).
- Added Hamburg to the trigger points for the Volkssturm and Volksgrenadier Decisions (Tanaka).
- The Murmansk convoy now requires Murmansk and all hexes to Belomorsk plus Vologda to be in Allied hands, having removed all hexes from Belomorsk to Volkov from the requirement (The Land).
- Afghan Partisans added (Pocus).
- The P key will now show Spanish Partisan locations after the turn on which they enter the war (Pocus).
- More Japanese AI Fortification scripts added (Mithrilotter).
- In the Supply scripts, #POPUP= <<TAG_78>> now says Japanese Bombers In Midway Hinder Allied Supply In Wake And Hawaii (Tanaka).

1939 Campaigns
- If India is brought into the war via DE 111 in 1939 then there will be an immediate wave of riots in India, impacting on supply and income, and her National Morale will fall by 10% (Dorky8).
- The Spanish Blue Division will now arrive as a full strength Division with 1 experience point (Mithrilotter).
- Added DE 416 and DE 645 from War in Europe to provide the USSR and Germany with dedicated anti-tank units.
- Changed the Unit script for the Flying Tigers so they will arrive at the start of the Allied turn if they are sent to China (Mithrilotter).
- Added Soviet Garrison units at Belomorsk and Kandalaksha and 1 extra Corps at Moscow.
- Soviet Winter will now only fire if there are 3 Axis units within 20 hexes of Kirov, rather than 25 hexes. Its effective range of 25 hexes is unchanged (calcwerc).
- DE 301 for the US to send tanks to Cairo now checks for El Alamein being in Axis hands, rather than for an Axis unit to be in El Alamein (Big John).
- While Italy is neutral, Spain will now mobilize 5-7% towards the Axis if there are 2 Allied Amphibious units within 20 hexes of Syracuse Port, or 7 or more Allied naval units within 12 hexes of Syracuse Port, as Franco is concerned at the impact an attack on his former ally will have on his own position.
- Removed the info only Partisan scripts for Manchuria that only related to keeping Soviet mobilization down.
- Chinese AI PURCHASE and RESEARCH script adjustments/optimizations (Mithrilotter).
- UK AI bonus units that arrive due to Sealion now adjusted by moving 2 Corps to the Veteran level from Intermediate level (Mithrilotter).
- Japanese, US AI fixes and improvements in the Pacific (Mithrilotter).
- Fixed a POPUP script error that did not allow for the display of the informational map position popups in the Mediterranean on Allied turns prior to Italian entry into the war.

1942-45 Race to Victory
- Added the missing #1275= unit name entry to the German, Spanish, and French localized unit.txt file (fafnir).

1939 Strategy Guides
- An explanation including a map on Italian Mobilization added (with special thanks to OldCrowBalthazor).
- Notes for DE 601 amended (Mithrilotter).
- On DE 603 removed the mention of Spain being mobilized by the Axis taking Egypt (APrusty).
- Mention of Naval/Tactical Carrier Mode changed to Bomber Mode (Mithrilotter).
- Added a note to say that once both Indochina and Hong Kong are in Axis hands, there is a 50% chance per turn of Thailand joining the Axis.(APrusty).
- Corrected the explanation of what happens if the Polish government in exile does not evacuate its soldiers from the USSR (Mithrilotter).
- Corrected the text regarding the importance of capturing Ledo (Mithrilotter).

All Strategy Guides
- Removed the reference to Tehran in the section on Turkish Interests in the Middle East as that is an optional rather than default script (Mithrilotter).




CaesarAug -> RE: Strategic Command WWII: World at War - v1.11.00 (4/20/2021 6:38:29 PM)

Oh, my word, thanks so much!!! [&o]





EarlyDoors -> RE: Strategic Command WWII: World at War - v1.11.00 (4/20/2021 7:46:22 PM)

I like the Summary Log !




Tanaka -> RE: Strategic Command WWII: World at War - v1.11.00 (4/20/2021 8:17:26 PM)

"- Fixed a rare CTD that would occur when attempting to place a new unit right at the start of your turn."

Yesss you finally found the bug! Haha




Elessar2 -> RE: Strategic Command WWII: World at War - v1.11.00 (4/21/2021 12:44:07 AM)

[8D]




OldCrowBalthazor -> RE: Strategic Command WWII: World at War - v1.11.00 (4/21/2021 5:37:19 AM)

Fixed an error that prevented Axis players from being able to shift the Murmansk convoy to Arkhangelsk when cutting off the applicable rail line running from Murmansk to Belomorsk (Aprusty).

Right on to this fix and all the others! [:)]




falco148 -> RE: Strategic Command WWII: World at War - v1.11.00 (4/21/2021 6:12:24 AM)

Could we get a link for this? I seem unable to download from MyPage for some reason.




CaesarAug -> RE: Strategic Command WWII: World at War - v1.11.00 (4/21/2021 8:29:12 AM)

Just checking to be sure...

If this is the case for when
- The HQ to be boosted must have a supply value < 5 and is now automatically increased to a supply value of 5 which caps its distribution supply at 8.

The following reads:
- LOW SUPPLY HQ boosting can only be achieved if the source HQ has a supply value >= 1 and < 3.
- The HQ to be boosted must have a supply value < 3 and is now automatically increased to a supply value of 5 which caps its distribution supply at 6.

Question: in the case of low HQ supply, is it boosted supply value of 5 (or should it be 4?) which caps its distribution supply at 6...

In other words:
- The HQ to be boosted must have a supply value < 3 and is now automatically increased to a supply value of 4 (?) which caps its distribution supply at 6.




Hubert Cater -> RE: Strategic Command WWII: World at War - v1.11.00 (4/21/2021 1:51:13 PM)


quote:

ORIGINAL: falco148

Could we get a link for this? I seem unable to download from MyPage for some reason.


I just added a link to the top post




Hubert Cater -> RE: Strategic Command WWII: World at War - v1.11.00 (4/21/2021 1:53:12 PM)


quote:

ORIGINAL: CaesarAug

Just checking to be sure...

If this is the case for when
- The HQ to be boosted must have a supply value < 5 and is now automatically increased to a supply value of 5 which caps its distribution supply at 8.

The following reads:
- LOW SUPPLY HQ boosting can only be achieved if the source HQ has a supply value >= 1 and < 3.
- The HQ to be boosted must have a supply value < 3 and is now automatically increased to a supply value of 5 which caps its distribution supply at 6.

Question: in the case of low HQ supply, is it boosted supply value of 5 (or should it be 4?) which caps its distribution supply at 6...

In other words:
- The HQ to be boosted must have a supply value < 3 and is now automatically increased to a supply value of 4 (?) which caps its distribution supply at 6.


Normally 4 would make sense with how distribution supply is regularly associated with incoming supply but this is a special rule where in this case it is intentionally bumped to 5 with a distribution of 6. It is the LOW SUPPLY case and the main reason we went with 5 for this special case was that it then allows upgrades, operational movement and so on. 4 does not etc.




Hubert Cater -> RE: Strategic Command WWII: World at War - v1.11.00 (4/21/2021 1:57:39 PM)

Just to add further clarification, previously an HQ in that low supply situation was bumped to 5(8) but 8 was felt to be too high thus the 5(6). So really it is just the 8 dropping to 6 that is the only change here along with the qualifying rule, e.g. when does the 5(6) apply and when does it not etc.




CaesarAug -> RE: Strategic Command WWII: World at War - v1.11.00 (4/21/2021 4:19:49 PM)

I see. Got it. I was in overlooking the minimum 5 supply for upgrades.
A good decision for the special low supply rule.

Iím still learning the rules of the game, hoping to making them naturally intuitive as I continue to mod and play.
Thanks for the clarification. [:)]





Scotty123 -> RE: Strategic Command WWII: World at War - v1.11.00 (4/21/2021 8:33:29 PM)

so once again I am asking> were can I find the upgrade DL for both W@W and W in Europe?




Hubert Cater -> RE: Strategic Command WWII: World at War - v1.11.00 (4/21/2021 10:09:50 PM)

Hi Scotty,

Try this link for WaW:

https://ftp.matrixgames.com/pub/StrategicCommandWWIIWorldAtWar/StrategicCommandWWII-WorldAtWar-UpdateComp-v1.11.00.00.zip

This one for WiE:

https://ftp.matrixgames.com/pub/StrategicCommandWWIIWarInEurope/StrategicCommand-UpdateComp-v1.21.00.zip




Tanaka -> RE: Strategic Command WWII: World at War - v1.11.00 (4/21/2021 10:52:23 PM)

Thanks for updating the missing notes Hubert!! Awesome update!! [&o]




Hubert Cater -> RE: Strategic Command WWII: World at War - v1.11.00 (4/22/2021 2:03:25 AM)

Our pleasure [:)][8D]




EarlyDoors -> RE: Strategic Command WWII: World at War - v1.11.00 (4/22/2021 8:59:22 AM)


quote:

ORIGINAL: EarlyDoors

I like the Summary Log !



Although I would prefer the order to be descending rather than ascending

..just need to add a recallable mpp/convoy summary now




ElvisJJonesRambo -> RE: Strategic Command WWII: World at War - v1.11.00 (4/23/2021 8:10:13 PM)

Summary Log? I should actually read.

@EarlyDoors --- We got a good one going. North Africa battle is different. The Russians making respectable fight, I had to back off a tad. Japs getting work done in China. Yes, you did win the Battle of Midway and are chipping away some Islands. Actually played it loose. Need some action. Your Bombers against Norway and civilians getting heavy.




rjh1971 -> RE: Strategic Command WWII: World at War - v1.11.00 (4/24/2021 7:41:14 PM)

Is enemy target highlights working fine for everybody? When I deselect the option I still get the combat results highlighted.




Hubert Cater -> RE: Strategic Command WWII: World at War - v1.11.00 (4/25/2021 5:46:41 PM)

Hi rjh1971,

There are two options in the ADVANCED screen, one is the 'Enemy target highlights', this highlights the targets with a red hex, and the second option is 'Enemy Losses Highlights', and this one displays the predicted combat results.

Perhaps this second option is still enabled on your end?

Hubert




EarlyDoors -> RE: Strategic Command WWII: World at War - v1.11.00 (4/26/2021 3:09:56 PM)

Is there any change to stop a 1 turn Poland conquest?

I'm not advocating it, just curious as my opponent has taken Warsaw turn 1 and Poland has not surrendered.

Furthermore, they are showing as 96% national morale !?!




BillRunacre -> RE: Strategic Command WWII: World at War - v1.11.00 (4/26/2021 3:59:56 PM)

This suggests that some scripts haven't fired, are you playing an official campaign or a mod?

While Poland may not surrender immediately on the fall of Warsaw, her NM should be a lot less.




EarlyDoors -> RE: Strategic Command WWII: World at War - v1.11.00 (4/26/2021 4:15:35 PM)

official campaign ChallengeID 312000




rjh1971 -> RE: Strategic Command WWII: World at War - v1.11.00 (4/26/2021 4:38:23 PM)


quote:

ORIGINAL: Hubert Cater

Hi rjh1971,

There are two options in the ADVANCED screen, one is the 'Enemy target highlights', this highlights the targets with a red hex, and the second option is 'Enemy Losses Highlights', and this one displays the predicted combat results.

Perhaps this second option is still enabled on your end?

Hubert

Hi Hubert, thanks for your reply. Unselecting "estimated losses highlights" leaves it like I had it before the patch, estimated losses only when I hover over an enemy unit. I hadn't notice/tweaked this last one.
So now everything is clear :-)




EarlyDoors -> RE: Strategic Command WWII: World at War - v1.11.00 (4/27/2021 10:09:42 AM)


quote:

ORIGINAL: BillRunacre

This suggests that some scripts haven't fired, are you playing an official campaign or a mod?

While Poland may not surrender immediately on the fall of Warsaw, her NM should be a lot less.


They surrendered on turn 3 - axis second turn - maybe nothing's changed, just seemed a bit weird




EarlyDoors -> RE: Strategic Command WWII: World at War - v1.11.00 (4/27/2021 6:58:42 PM)

When you log in after your opponent has resigned, the replay shown is of your own move, which is...err, different




ElvisJJonesRambo -> RE: Strategic Command WWII: World at War - v1.11.00 (4/27/2021 8:28:11 PM)


quote:

ORIGINAL: EarlyDoors

When you log in after your opponent has resigned, the replay shown is of your own move, which is...err, different


Think it depends on when the resignation occurs.
Replay shows "last completed" turn.
In our game, I called it quits before any action.

You took me to the 1944 Door.




BillRunacre -> RE: Strategic Command WWII: World at War - v1.11.00 (4/28/2021 8:48:28 AM)


quote:

ORIGINAL: EarlyDoors


quote:

ORIGINAL: BillRunacre

This suggests that some scripts haven't fired, are you playing an official campaign or a mod?

While Poland may not surrender immediately on the fall of Warsaw, her NM should be a lot less.


They surrendered on turn 3 - axis second turn - maybe nothing's changed, just seemed a bit weird


Thanks, I've got to the bottom of it, it turns out that there are two National Morale scripts in our WWII: War in Europe game that aren't included in this game. I think it must have been an oversight so have made a note to include them in a future update.




Yvan1326 -> RE: Strategic Command WWII: World at War - v1.11.00 (4/28/2021 11:00:20 AM)

Hello
I don't find de645 into "UNIT" script?
Is it an oversight ?

SORRRRRRY, I found it[&o]




IIo4Tu -> RE: Strategic Command WWII: World at War - v1.11.00 (4/29/2021 4:21:25 AM)

Explain, where now it is necessary to keep the garrisons in Manchuria, that the USSR did not raise the mobilization?

Previously, there were partisans, and even earlier, the hexes were highlighted, now neither the partisans nor the marked hexes, it is not clear where the key points are now...




Page: [1] 2   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
6.054688E-02