RE: Submitted Mods (Full Version)

All Forums >> [New Releases from Matrix Games] >> Tigers on the Hunt >> Mods and Scenarios



Message


duncanrice -> RE: Submitted Mods (3/31/2016 6:57:47 AM)

Thanks for the SL mods. [&o] They save the game. The counters it comes with are just too annoying for me. The SL mod makes it a fantastic game for us old SL/ASL veterans. One thing I would like to see is a more dramatic wreck counter.




Gerry4321 -> RE: Submitted Mods (4/1/2016 5:44:29 AM)


quote:

ORIGINAL: rdcokeer

I have a question. Can you save more than one Mod in a folder? For example desert and snow and if so how do you get the game to select one over the standard file?


I think the Mod Manager JSGME is the way to go. A few clicks to swap out mods. Please search here for good help on this.




36142CP -> RE: Submitted Mods (4/1/2016 7:41:32 AM)

Why use the JSGME thing when you can open windows explorer and copy and paste to your hearts desire[8D] create a backup folder of the original graphic files in case it all goes wrong, and job done!




Cataphract88 -> RE: Submitted Mods (4/1/2016 8:38:30 AM)


quote:

ORIGINAL: 36142CP

Why use the JSGME thing when you can open windows explorer and copy and paste to your hearts desire[8D] create a backup folder of the original graphic files in case it all goes wrong, and job done!


True, but JSGME is a very handy tool to have. [:)]




parusski -> RE: Submitted Mods (4/1/2016 11:46:11 PM)


quote:

ORIGINAL: cataphract88


quote:

ORIGINAL: 36142CP

Why use the JSGME thing when you can open windows explorer and copy and paste to your hearts desire[8D] create a backup folder of the original graphic files in case it all goes wrong, and job done!


True, but JSGME is a very handy tool to have. [:)]


JSGME is wonderful. I use it for lot's of games.




Alejo1968 -> RE: Submitted Mods (4/2/2016 2:34:57 AM)


quote:

ORIGINAL: Elberich

One thing I would like to see is a more dramatic wreck counter.


+1. Maybe something similar to the ASL standard white counters?




fran52 -> RE: Submitted Mods (4/3/2016 8:19:20 AM)

Only to give an idea about the colorful mod with smaller marker(i forgot to upload the first time).The mod is in post 9.

[image]local://upfiles/42231/1383956168254FD3BF4CCF4F8C831D26.jpg[/image]




giffin -> RE: Submitted Mods (4/3/2016 6:17:09 PM)


quote:

ORIGINAL: acropora

Only to give an idea about the colorful mod with smaller marker(i forgot to upload the first time).The mod is in post 9.

[image]local://upfiles/42231/1383956168254FD3BF4CCF4F8C831D26.jpg[/image]


This is just what I am looking for Acropora. Where can I down load it?
thanks!![&o]




Cataphract88 -> RE: Submitted Mods (4/3/2016 11:19:46 PM)

007, Here is Acropora's link to the mod:

http://www.matrixgames.com/forums/fb.asp?m=4040205

Hope this helps. [:)]




parusski -> RE: Submitted Mods (4/4/2016 12:51:18 AM)


quote:

ORIGINAL: acropora

Only to give an idea about the colorful mod with smaller marker(i forgot to upload the first time).The mod is in post 9.

[image]local://upfiles/42231/1383956168254FD3BF4CCF4F8C831D26.jpg[/image]


Fanfreakintastic. This is now my main mod. Great work.




baloo7777 -> RE: Submitted Mods (4/4/2016 1:43:13 AM)

I am using your mod Acropora and I noticed that when a leader breaks it doesn't change to a broken leader counter? Is this WAD? Great Mod, and I go back and forth between this one and the ASL one (nostalgia kicks in)!




fran52 -> RE: Submitted Mods (4/4/2016 7:02:48 AM)

quote:

it doesn't change to a broken leader counter?

Is the same picture but with broken written in red.
I was a player of Squad Leader but i have always desired to have better counters.I was also a player of the Napoleonic game Clash of Art,game with fantastic counters.Also the eye wont is part[:D]




giffin -> RE: Submitted Mods (4/4/2016 4:10:21 PM)


quote:

ORIGINAL: cataphract88

007, Here is Acropora's link to the mod:

http://www.matrixgames.com/forums/fb.asp?m=4040205

Hope this helps. [:)]

quote:

cataphract88


Thank you cataphract88!




Zap -> RE: Submitted Mods (4/7/2016 4:32:00 AM)

When adding Mods are there any mods that can be added together. For example winter Mod with colorful mod. If they can't be We are missing some of the good of one Mod. Mix Mods would that be something a Modder would be interested in. Something like Modder's worked together in Distant Worlds




fran52 -> RE: Submitted Mods (4/7/2016 7:12:24 AM)

Is not possible to mix the mod.Units and terrain are in the same bitmap file.To mix, a work with a graphycs program, must be done.




Ratzki -> RE: Submitted Mods (4/7/2016 8:49:57 AM)

Just put the mods on different layers and delete everything around the new mod on each layer. Then by turning on and off the layers you can choose the mods that you want and then when saving just flatten the image




Zap -> RE: Submitted Mods (4/7/2016 9:53:55 AM)


quote:

ORIGINAL: Ratzki

Just put the mods on different layers and delete everything around the new mod on each layer. Then by turning on and off the layers you can choose the mods that you want and then when saving just flatten the image


I was speaking about Colorful Mod units and have the winter terrain or desert terrain. Interchange buildings etcetera. Will what you describe do that?




Ratzki -> RE: Submitted Mods (4/7/2016 8:43:39 PM)

Yes. Take the mode file that you want and insert it on a different layer in a paint program. Delete everything except for the MOD'd part. As you add other MODs, add more layers to the Paint file and repeat the deleting everything but the MOD'd part. You will have to have the original layer that has the complete set of graphics as the bottom layer so that the parts that are not MOD'd are able to show through. You will be able to turn off a layer or layers that you do not want and the layers that you do want will sit on top of the original complete graphics. When you have what you want, resave the file(my paint program asks if I want to flatten the image which is to say "combine all layers into one graphic with the top layers overwriting the lower ones"). You will now have a file with only the MODs that you want showing. This way you can mix and match as you want with little effort. The worst is the initial deleting around the MOD'd parts so that the lower layer will show through. This could be taken care of as well by the MOD'rs doing this step for everyone as they MOD. As long as they start with the original size everything will line up through the layers.
I have not played with the buildings and LOS outlines too much, been very busy at home. Should be able to be done though.




Zap -> RE: Submitted Mods (4/7/2016 8:58:56 PM)

quote:

ORIGINAL: Ratzki

Yes. Take the mode file that you want and insert it on a different layer in a paint program. Delete everything except for the MOD'd part. As you add other MODs, add more layers to the Paint file and repeat the deleting everything but the MOD'd part. You will have to have the original layer that has the complete set of graphics as the bottom layer so that the parts that are not MOD'd are able to show through. You will be able to turn off a layer or layers that you do not want and the layers that you do want will sit on top of the original complete graphics. When you have what you want, resave the file(my paint program asks if I want to flatten the image which is to say "combine all layers into one graphic with the top layers overwriting the lower ones"). You will now have a file with only the MODs that you want showing. This way you can mix and match as you want with little effort. The worst is the initial deleting around the MOD'd parts so that the lower layer will show through. This could be taken care of as well by the MOD'rs doing this step for everyone as they MOD. As long as they start with the original size everything will line up through the layers.
I have not played with the buildings and LOS outlines too much, been very busy at home. Should be able to be done though.


I,m guessing the paint program that comes with windows is not able to do that and another one would be needed. Also someone told me they wish Modders separated the images, so each was individual.




Franciscus -> RE: Submitted Mods (4/7/2016 9:03:44 PM)

quote:

ORIGINAL: Zap


quote:

ORIGINAL: Ratzki

Yes. Take the mode file that you want and insert it on a different layer in a paint program. Delete everything except for the MOD'd part. As you add other MODs, add more layers to the Paint file and repeat the deleting everything but the MOD'd part. You will have to have the original layer that has the complete set of graphics as the bottom layer so that the parts that are not MOD'd are able to show through. You will be able to turn off a layer or layers that you do not want and the layers that you do want will sit on top of the original complete graphics. When you have what you want, resave the file(my paint program asks if I want to flatten the image which is to say "combine all layers into one graphic with the top layers overwriting the lower ones"). You will now have a file with only the MODs that you want showing. This way you can mix and match as you want with little effort. The worst is the initial deleting around the MOD'd parts so that the lower layer will show through. This could be taken care of as well by the MOD'rs doing this step for everyone as they MOD. As long as they start with the original size everything will line up through the layers.
I have not played with the buildings and LOS outlines too much, been very busy at home. Should be able to be done though.


I,m guessing the paint program that comes with windows is not able to do that and another one would be needed.


No, Windows Paint won't do at all.

But apart from professional programs, there are several free good programs that can do the job, I think. IMHO, Paint.net (http://www.getpaint.net/index.html), that I have used several times, is probably an excellent program to work with a multi-layer image file. Gimp may be also, but I have no experience with it.

Regards




Ratzki -> RE: Submitted Mods (4/8/2016 12:43:11 AM)

I use Paint.net




KhanDam2 -> RE: Submitted Mods (4/11/2016 12:13:48 PM)

You can found in Scenario Section the Special mod MAI-Phu based on ASL Mod and change the Color and Drawing for Russian and British to Figure Japanese and French

--> Here<--

[sm=00000619.gif]As i explain in scenario section This Mod is only Done for using with Mai Phu Scenario it change only graphical representation for Russian and British to Figure Japaneses and French. The all Face Value are the same as Original Country the Ordonance and AFV are the same model as original not the Exact french and Japanese existing

Updated v1.2 ( May, 17 2016 ) Different update
Updated v1.1 ( April, 12 2016 ) invert French / Japanese as they should be

so as usual save the original terrain before overwite it .


have Fun



[image]local://upfiles/51059/266986C3DC7844E087D1060E350D45CC.jpg[/image]




KhanDam2 -> RE: Submitted Mods (4/14/2016 12:59:36 AM)

You can found in Scenario Section the Special mod GE-AM-BR_vs_IT based on ASL Mod and change the Color and Drawing for Russian to Figure Italien

--> Here<--

[sm=00000619.gif]As i explain in scenario section This Mod is only Done for using Italian vs German, American or British like in Scenario : THE BATTLE FOR ROME
This mod change only graphical representation for Russian to Figure Italian. The all Face Value are the same as Original Country the Ordonance and AFV are the same model as original not the Exact Italian existing


Updated v1.0 ( May, 17 2016 ) Different update

so as usual save the original terrain before overwite it .


have Fun


[image]local://upfiles/51059/A4856EF3362D4F6F8268D87EB9946C02.jpg[/image]




KhanDam2 -> RE: Submitted Mods (4/15/2016 5:23:37 PM)

You can found in Scenario Section the Special mod Tri Ang Bridge based on ASL Mod and change the Color and Drawing for Russian to Figure ANV & Vietcong vs american to figure USMC & ARVN

--> Here<--

[sm=00000619.gif]As i explain in scenario section This Mod is only Done for using in Scenario : Tri Ang Bridge
This mod change only graphical representation for Russian an American . The all Face Value are the same as Original Country the Ordonance and AFV are the same model as original not the Exact ANV & Vietcong and USMC & ARVN existing


Updated v1.0 ( May, 17 2016 ) Different update

so as usual save the original terrain before overwite it .


have Fun




[image]local://upfiles/51059/456BB5E316694464B582A2AB631D9A42.jpg[/image]




rico21 -> RE: Submitted Mods (4/15/2016 6:05:01 PM)

This Mod is only Done for using in Scenario : Tri Ang Bridge
This mod change only graphical representation for Russian an American . The all Face Value are the same as Original Country the Ordonance and AFV are the same model as original not the Exact ANV & Vietcong and USMC & ARVN existing

YOU ARE THE KING OF THE MODS, MARVELLOUS!!![sm=happy0029.gif]

And the viets are well in the village[sm=Evil-210.gif]




fran52 -> RE: Submitted Mods (5/16/2016 8:21:45 AM)

In the zip the colorful mod with the new terrain 1.02.7.




fran52 -> RE: Submitted Mods (5/16/2016 8:22:55 AM)

To remember the features of the mod

[image]local://upfiles/42231/85B5C458BC864B59B1C4361479963A61.jpg[/image]




giffin -> RE: Submitted Mods (5/17/2016 2:30:01 AM)


quote:

ORIGINAL: acropora

In the zip the colorful mod with the new terrain 1.02.7.

quote:

acropora


Thank you for my favorite Terrain MOD!




Rosseau -> RE: Submitted Mods (5/17/2016 3:37:04 AM)

Great job by all, and I switch mods sometimes. But "the colorful" mod is my favorite out of many good efforts.




fran52 -> RE: Submitted Mods (5/17/2016 8:19:12 AM)

Thank you for your appreciation.




Page: <<   < prev  1 2 [3] 4 5   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
3.613281E-02