OK Allied Nasty
Moderators: wdolson, MOD_War-in-the-Pacific-Admirals-Edition
OK Allied Nasty
Maybe a bit to nasty
As before install updated 17 from the tech thread 1st then overlay this
Good luck....
As before install updated 17 from the tech thread 1st then overlay this
Good luck....
- Attachments
-
- Allied17.zip
- (851.06 KiB) Downloaded 235 times
RE: OK Allied Nasty
Scn 17 from tech thread looks like damaged, can u re-upload it ? Thanks !!!
I will take a look, but not play, I'm still running away from the IJN Carriers on the other Ironman.
BTW: There will be any trouble if I re-install the scen I'm currently playing?
I will take a look, but not play, I'm still running away from the IJN Carriers on the other Ironman.
BTW: There will be any trouble if I re-install the scen I'm currently playing?
Where is Scn 17? (was RE: OK Allied Nasty
Where can I find scenario 17?
Also, are there scenarios 15, 16, 18-20?
Also, are there scenarios 15, 16, 18-20?
Chris
(Did you ever stop to think and forget to start?)
(Did you ever stop to think and forget to start?)
RE: Where is Scn 17? (was RE: OK Allied Nasty
They are in the tech forum I just bumped thread
RE: Where is Scn 17? (was RE: OK Allied Nasty
I'm sorry, but where in the tech forum? I tried looking under Scen 17, scn 17, etc., but could not find a link.
Chris
(Did you ever stop to think and forget to start?)
(Did you ever stop to think and forget to start?)
RE: Where is Scn 17? (was RE: OK Allied Nasty
I loaded Scen 17 (Allied17.zip ) and got a Scenario could not load message when I trie dto start it.
Do I have to load Patch 7?
Thanks[&o]
Do I have to load Patch 7?
Thanks[&o]
Chris
(Did you ever stop to think and forget to start?)
(Did you ever stop to think and forget to start?)
RE: Where is Scn 17? (was RE: OK Allied Nasty
Shouldnt be an issue check its installed in the correct folder
It worked ok for me
It worked ok for me
RE: Where is Scn 17? (was RE: OK Allied Nasty
OK,
I loaded and installed Patch 7. I Loaded and installed all the diferent scenarios (1-15, 17-19) by downloading the AEdataupdatesxx.zip files as AEdataupdatesxx.EXE files and running them. They all ran sucessfully and showed files being installed.
I also reloaded Allied17.zip and moved the files to the SCEN folder.
However, I still get Scen 17 failed to load and I don't seem to have any scenario names for 15, 16, 18 or 19.
So, what am I doing wrong?
I loaded and installed Patch 7. I Loaded and installed all the diferent scenarios (1-15, 17-19) by downloading the AEdataupdatesxx.zip files as AEdataupdatesxx.EXE files and running them. They all ran sucessfully and showed files being installed.
I also reloaded Allied17.zip and moved the files to the SCEN folder.
However, I still get Scen 17 failed to load and I don't seem to have any scenario names for 15, 16, 18 or 19.
So, what am I doing wrong?
Chris
(Did you ever stop to think and forget to start?)
(Did you ever stop to think and forget to start?)
- moonraker65
- Posts: 565
- Joined: Wed Jul 14, 2004 3:11 pm
- Location: Swindon,Wilts. UK
RE: Where is Scn 17? (was RE: OK Allied Nasty
When you downloaded all the scen files from the Tech Thread did you right click each one ? The same goes for Patch 7. Got to right click to change the properties to an .exe instead of a .zip
intel i9 13900k 128 GB RAM, RTX 4070 ti GFx card
RE: Where is Scn 17? (was RE: OK Allied Nasty
When you downloaded all the scen files from the Tech Thread did you right click each one ? The same goes for Patch 7. Got to right click to change the properties to an .exe instead of a .zip
I downloaded them by saving them as AEDATAUPDATESxx.EXE files, then running each one. I downloaded AEDATAUPDATES1 thru AEDATAUPDATES6, AEDATAUPDATES10 thru 15, and AEDATAUPDATES17 thru 20. I downloaded them into my SCEN folder and ran them from there. Each one ran successfully.
Should I have downloaded AEupdate1123h.zip, AEupdate1123j2.zip?
Where is the link to Patch 7 and should I load Patch 7 first, then the scenario updates, or does it make a difference?
Thanks
Chris
(Did you ever stop to think and forget to start?)
(Did you ever stop to think and forget to start?)
Can't run Scn 17.
I downloaded, extracted and ran executables from AEupdate1123h.zip, AEupdate1123j2.zip. One of these created a new icon on my desktop titled War in the pacific ADmirals's Edition (Beta).
I still get scenario can't load when I try to run #17. I ran AEDATAUPDATES17.EXE and it ran successfullyt, but I sytill get scenario can't load.
So what am I doing wrong here??
(I did set it to have Allied Computer when I selected the scenario)
Thanks
Also, 15, 16, 18-20 scenarios don't show up on my list of available scenarios.
I still get scenario can't load when I try to run #17. I ran AEDATAUPDATES17.EXE and it ran successfullyt, but I sytill get scenario can't load.
So what am I doing wrong here??
(I did set it to have Allied Computer when I selected the scenario)
Thanks
Also, 15, 16, 18-20 scenarios don't show up on my list of available scenarios.
Chris
(Did you ever stop to think and forget to start?)
(Did you ever stop to think and forget to start?)
- moonraker65
- Posts: 565
- Joined: Wed Jul 14, 2004 3:11 pm
- Location: Swindon,Wilts. UK
RE: Can't run Scn 17.
derhexer - Follow these steps from the Tech Thread.
EXE File "AEdataUpdateS1.exe" (after renaming from ZIP) installs the files into the root folder of AE, in my case
"J:\Matrix Games\War in the Pacific Admiral's Edition".
It should install the files into the sub folder SCEN, in my case
"J:\Matrix Games\War in the Pacific Admiral's Edition\SCEN".
People not aware of this will not enjoy the changes, and may not even notice.
To correct:
Make the exe file either install the files directly into the right folder (SCEN),
or let it install the files into a temp folder and move the files manually to the SCEN folder overwriting the original files.
In any case heed Andy's advice to back up the SCEN folder before installing the changes.
To check: if you load the game and a saved game a message should pop up asking
"Add data base changes to this official campaign (#1)? YES/NO"
Only if answered with YES the data base changes are applied.
EXE File "AEdataUpdateS1.exe" (after renaming from ZIP) installs the files into the root folder of AE, in my case
"J:\Matrix Games\War in the Pacific Admiral's Edition".
It should install the files into the sub folder SCEN, in my case
"J:\Matrix Games\War in the Pacific Admiral's Edition\SCEN".
People not aware of this will not enjoy the changes, and may not even notice.
To correct:
Make the exe file either install the files directly into the right folder (SCEN),
or let it install the files into a temp folder and move the files manually to the SCEN folder overwriting the original files.
In any case heed Andy's advice to back up the SCEN folder before installing the changes.
To check: if you load the game and a saved game a message should pop up asking
"Add data base changes to this official campaign (#1)? YES/NO"
Only if answered with YES the data base changes are applied.
intel i9 13900k 128 GB RAM, RTX 4070 ti GFx card
RE: Can't run Scn 17.
derhexer - Follow these steps from the Tech Thread.
EXE File "AEdataUpdateS1.exe" (after renaming from ZIP) installs the files into the root folder of AE, in my case
"J:\Matrix Games\War in the Pacific Admiral's Edition".
It should install the files into the sub folder SCEN, in my case
"J:\Matrix Games\War in the Pacific Admiral's Edition\SCEN".
People not aware of this will not enjoy the changes, and may not even notice.
To correct:
Make the exe file either install the files directly into the right folder (SCEN),
or let it install the files into a temp folder and move the files manually to the SCEN folder overwriting the original files.
In any case heed Andy's advice to back up the SCEN folder before installing the changes.
To check: if you load the game and a saved game a message should pop up asking
"Add data base changes to this official campaign (#1)? YES/NO"
Only if answered with YES the data base changes are applied.
Thanks, Moonraker but I still can't get scen 17 to run. I get the message 'scenario won't load'.[&o]
Chris
(Did you ever stop to think and forget to start?)
(Did you ever stop to think and forget to start?)
- moonraker65
- Posts: 565
- Joined: Wed Jul 14, 2004 3:11 pm
- Location: Swindon,Wilts. UK
RE: Can't run Scn 17.
When you run the installer it will by default place the scen files in to the main game directory and I suspect this is what has happened. Check your main WiTP game folder and see if you can spot the files in there. If they are just move them all in to the SCEN folder and it should be fine
intel i9 13900k 128 GB RAM, RTX 4070 ti GFx card
Coastal Routing & Scn 17 RE: OK Allied Nasty
I've been playing Scen 17. So far looks good. I sank the Saratoga at PH. Haven't encountered any extra ships or forces aside from Sara, but I'm only on 12/8.
BTW, what is Coastal Routing?
BTW, what is Coastal Routing?
Chris
(Did you ever stop to think and forget to start?)
(Did you ever stop to think and forget to start?)
RE: Coastal Routing & Scn 17 RE: OK Allied Nasty
Moonraker wrote "When you run the installer it will by default place the scen files in to the main game directory and I suspect this is what has happened. Check your main WiTP game folder and see if you can spot the files in there. If they are just move them all in to the SCEN folder and it should be fine "
That is exactly what happened. I moved the files and the scenarios work now. Thanks!![:D]
That is exactly what happened. I moved the files and the scenarios work now. Thanks!![:D]
Chris
(Did you ever stop to think and forget to start?)
(Did you ever stop to think and forget to start?)
- moonraker65
- Posts: 565
- Joined: Wed Jul 14, 2004 3:11 pm
- Location: Swindon,Wilts. UK
RE: Coastal Routing & Scn 17 RE: OK Allied Nasty
Nice one [:)]Don't forget to overlay Andy's latest data update though which is a normal .zip file
intel i9 13900k 128 GB RAM, RTX 4070 ti GFx card
RE: Coastal Routing & Scn 17 RE: OK Allied Nasty
Sorry not been around I hope you are all sorted now
RE: Coastal Routing & Scn 17 RE: OK Allied Nasty
The overlay is the nasty version it might not be for everyone.....